Aprašymas:
Gamintojas:
Index
YT-818080
Barcode
5906083142093
Unit of measure
PCE
Volume
343.98
Weight
16.5
Attributes
Type
COB LED, SMD LED
Power
230 W
Luminous flux
22500 (tube), 3000 (reflector) lm
Lighting modes
4: fluorescent tube, reflector, light tube and reflector at the same time
Voltage
220-240 V a.c.
Frequency
50/60 Hz
Material
aluminum, P.C, PA6
Cloche material
P.C
Cloche color
transparent
Dimensions
1300x525x430 mm
Color temperature
6500 K
Colors reflection factor CRI Ra
80
Operation angle
360 ˚
Max. socket load
3000 W
Light control
yes
Stand / tripod
yes
Tripod included
yes
Telescopic
yes
Wire length
5 m
Wire section area
3Gx1.5 mm²
Wire insulation type
H07RN-F
Electric insulation class
I
Mechanical strength
IK08
Protection grade
IP54
Weight
9.7 kg
Application
outside, inside
The YATO YT-818080 mains-powered floodlight is a portable light source designed for illuminating workstations, assembly areas, and any space requiring intense lighting. Featuring both an LED light tube and an adjustable spotlight, it provides uniform ambient illumination while simultaneously directing a concentrated beam of light onto a specific work area. Its design—which includes a wheeled base and a telescopic pole—allows for easy height adjustment and convenient movement between different workstations.
The floodlight is suitable for indoor use; furthermore, its design, which limits the ingress of dust and water, also allows for limited use in outdoor environments. Light source:
230 W LED light tube
Light tube luminous flux: 22,500 lm
Adjustable LED spotlight with a luminous flux of 3,000 lm
Color temperature: 6,500 K
Color Rendering Index (CRI): 80
Light tube beam angle: 360° – ensures uniform ambient illumination
Adjustable spotlight allows for directing light precisely onto a specific work area
Power source:
Mains power supply: 220–240 V~ / 50–60 Hz
Power cord: H07RN-F 3 × 1.5 mm²
Built-in 220–240 V~ mains sockets
Maximum total load for output sockets: 3,000 W
Electrical protection class: I
The mains sockets allow for the connection of additional electrical devices, provided their specifications are compatible with the technical parameters of the light unit. A built-in cord winder makes it easy to organize the power cable after use or during transport.
Operating modes and runtime:
The light unit is powered directly from the mains; therefore, it does not require a battery or charging. The light tube and the spotlight feature independent switches, allowing for three different configurations:
light tube only – for uniform ambient lighting
spotlight only – for focused illumination of a specific area
both the light tube and the spotlight – for simultaneous illumination of the entire workspace and a specific task area
Design and features:
telescopic pole for adjusting the height of the light sources
locking mechanism for the telescopic pole to secure the desired height
adjustable spotlight for directing the light beam
base equipped with transport wheels for easy movement
wheel locks to ensure stability during operation
power cord winder
handle for convenient transport
IP54 ingress protection rating
IK08 mechanical impact resistance
designed for indoor use and limited outdoor use
weight: 9.7 kg
The design of this mobile stand allows you to position the light sources exactly where needed, then lock the wheels and the telescopic pole in place. This enables the unit to serve as a stationary light source for a workstation or be repositioned as required by the tasks at hand.
(2)
