Aprašymas:
Gamintojas:
Mark
Yato
Symbol
YT-99536
Series
GRE
Dimensions
460x190x75 mm
Application
outside and inside buildings
Compatible with(s)
YT-99570, YT-99571
Housing material
aluminum, stainless steel (mesh)
Color
white
Mass
2.2kg
Tension
220-240 V a.c.
Power
2000 W
Cable length
1.9 m
Switch
YES
Level of security
IP65
Frequency
50/60 Hz
Type of mounting
wall, ceiling, stand
Overheating protection
Yes
Warm-up time
1 p
Temperature regulation
NO
Color temperature
1500 K
Filament type
amber halogen lamp, low flash level (low glare)
Work area
12-24 m²
Service life of the heating element
6000 h
Infrared waves
short
The Yato infrared heater is perfect for heating your workplace or rest area on cold days and nights.
Equipped with a quickly heating amber halogen lamp, it is able to insulate an area of approximately 12-24 m2.
Additionally, the low glare filament ensures a low level of flash compared to other radiators, so that the lamp does not hurt the eyes.
The IP65 protection level allows you to hang the lamp in places exposed to precipitation, e.g. on the terrace, in the gazebo, etc.
The mounting kit allows you to mount the radiator on the wall, ceiling and Yato stand (YT-99570, YT-99571)
LAMP:
filament: amber halogen lamp, low flash level (low glare)
heating area: 12-24m2
filament life: 6000h
infrared waves: short
Warm-up time: 1 second
light color: 1500K
installation location: wall, ceiling, stand
indoor and outdoor use
The infrared heater works by radiation, i.e. the way the sun heats. The heat is emitted in the form of infrared radiation, and no air is needed. Walls, furniture and people are heated directly. Radiant heaters heat a given place immediately and directly.
IMPORTANT: Due to the high power of the device, the mains circuit must be equipped with a protective conductor and protection of at least 16 A. If you use extension cords, use a high-class extension cord with three wires that can withstand a current load of 16 A. If in doubt, contact your a qualified electrician
(1)
