Description:
Brand:
Mark
Toya
Symbol
76830
Series
GRD
Application
electronics industry
Diameter
1mm
Mass
16 g
Alloy composition
Sn60Pb40
Character
soldering wire
Binder type
for soft soldering
Type of binder
leaded
Melting temperature
190 ËšC
Type of flux
F-SW26
Flux content
2.5%
Number of flux cores
3
Solder binder with flux produced in the first smelting of tin and lead in accordance with the PN EN 29453:2000 standard, in a continuous casting process without access to air, then extruded, which ensures the elimination of oxides.
binder 0.5 mm thick and weighing 100 g, with a tin content in the product ranging from 59.5% to 60.5%, and a melting temperature ranging from 183°C to 190°C.
SW26 flux is made on the basis of rosin and an organic halogen activator, which after soldering becomes "stuck" in the rosin, so it does not have direct contact with the solder and does not cause corrosion, and also facilitates melting and increases the fluidity of the solder.
Solder binder is mainly used in the electronics industry, for the production of standard electronic devices and components, and electrical engineering.
The binder cannot be used in equipment not covered by the exemptions from the restriction contained in Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended.
(1)
