Aprašymas:
Gamintojas:
Index
YT-82423
Barcode
5906083138546
Unit of measure
PCE
Volume
3.085
Weight
0.5
Attributes
Glue stick diameter
7 mm
Power
15 W
Capacity
3.5 g/min
Heating time
2 min
Voltage
3.7 V d.c.
Battery type
Li-Ion
Battery capacity
2200 mAh
Charger
USB Type-C
Charger included
no
Charging time
1 h
Working time
30-40 min
Max. working time
40 min
Electric insulation class
III
Weight
0.28 kg
Set includes
glue gun, glue insert x2, USB Type-C cable
YATO YT-82423 Cordless Glue Gun is designed for bonding various materials using hot melt glue sticks with a diameter of 7 mm. The cordless power supply allows for operation without a constant connection to the electrical grid, making it easier to perform assembly, repair, and decorative tasks in places without access to an external power source. The gun is equipped with a Li-Ion 3.7 V battery with a capacity of 2200 mAh and charges via USB-C.
Key Features:
maximum power: 15 W
battery: Li-Ion 3.7 V / 2200 mAh
heating time: 2 min
operating time: 30-40 min
gluing efficiency: 3.5 g/min
glue stick diameter: 7 mm
included 2 glue sticks 7 x 100 mm
charging via USB-C
USB-C cable length 60 cm
charging time: approx. 60 min
automatic shutdown after 5 min of inactivity
weight: 280 g
glue sticks and charging cable
Battery Power Supply
The Li-Ion battery with a capacity of 2200 mAh provides approximately 30-40 minutes of operation. Charging occurs through the USB-C port. An indicator light signals the charging status and the heating of the device. The gun should not be used while charging.
Heating and Glue Dispensing
Once turned on, the gun heats up for about 2 minutes. After reaching the working temperature, glue dispensing can begin using the mechanical trigger button. The device's output is 3.5 g/min.
Working with Glue
The glue should be applied to clean, dry, and degreased surfaces. After applying the glue, the joined elements should be pressed together. Initial bonding occurs after about 1-2 minutes. For larger surfaces, it is recommended to apply glue in dots. Foam products, such as polystyrene, can only be glued if they have a protective layer. When gluing textile materials and similar, the glue should be applied in a wavy line.
(1)
